Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Weider Manuals
  4. Fitness Equipment
  5. powerguide x2
  6. User manual

Weider X2 User Manual

Hide thumbs Also See for X2:

Advertisement

Quick Links

Model No. WEEMSY70080
Serial No.
Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts or dam-
aged parts, please call:
08457-089009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
All manuals and user guides at all-guides.com
Serial
Number
Decal
USERʼS MANUAL
Patent Pending
w
Visit our website at
www.weiderfitness.com
®

Advertisement

loading

Related Manuals for Weider X2

Summary of Contents for Weider X2

  • Page 1 All manuals and user guides at all-guides.com ® USERʼS MANUAL Model No. WEEMSY70080 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing parts or dam- aged parts, please call:...

  • Page 2: Table Of Contents

    How to Order Replacement Parts ........... . . Back Cover WEIDER is a registered trademark of ICON Health & Fitness, Inc.

  • Page 3: Important Precautions

    All manuals and user guides at all-guides.com Important Precautions WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the training system. 1. It is the responsibility of the owner to ensure 8. Keep hands and feet away from moving parts. that all users of the training system are ade- quately informed of all precautions.

  • Page 4: Before You Begin

    All manuals and user guides at all-guides.com Before You Begin Thank you for selecting the versatile WEIDER toll-free at 08457-089009. To help us assist you, ® Training System. The WEIDER X2 offers a selection please note the product model number and serial ®...

  • Page 5: Assembly

    All manuals and user guides at all-guides.com Assembly Make sure you have the following tools: Make Assembly Easier for Yourself! • Two (2) adjustable spanners Everything in this manual is designed to ensure that the training system can be • One (1) standard screwdriver assembled successfully by anyone.
  • Page 6 All manuals and user guides at all-guides.com Frame Assembly Before you begin this step, make sure that you have read all of the information on page 5. This introduction will save you much more time than it takes to read it! Open the parts bag labelled “FRAME ASSEMBLY.”...
  • Page 7 All manuals and user guides at all-guides.com 3. Press a 25mm x 50mm Inner Cap (39) into the sup- port tube on the Front Upright (4). Support Tube Slide the Front Upright (4) onto the M8 x 70mm Carriage Bolts (64) in the Base (1). Thread an M8 Nylon Locknut (70) onto each Carriage Bolt.
  • Page 8 All manuals and user guides at all-guides.com 5. Press a 50mm Square Inner Cap (37) into the end of the Top Frame (6). Hold the Top Frame on the Rear Brackets Upright (5) and the Front Upright (4). Make sure that the Weight Guides (13) are in front of the indicat- ed brackets on the Top Frame.
  • Page 9 All manuals and user guides at all-guides.com Arm Assembly 8. Open the parts bag labelled “ARM ASSEMBLY.” Insert the indicated end of the Locking Plate (29) into the slot in the support tube on the Front Upright (4). Lubricate an M10 x 65mm Bolt (58). Attach the Locking Plate to the indicated hole in the support tube Lubricate with the Bolt, two M10 Flat Washers (62), and an...
  • Page 10 All manuals and user guides at all-guides.com 11. Insert the round tube on the Right Arm (11) into the indicated hole in the Butterfly/Press Frame (9). While a second person holds the Right Arm, place a 25mm Washer (85) over the tube on the Right Arm. Attach the Right Arm with an M6 x 35mm Screw (77) and an M6 Nylon Locknut (79).
  • Page 11 All manuals and user guides at all-guides.com 15. Wrap the Butterfly Cable (47) around a 90mm Pulley (50) in the direction shown. Attach the Pulley and two Pulley Covers (28) to the Pulley Frame (27) with an M10 x 50mm Bolt (54) and an M10 Nylon Locknut (60).
  • Page 12 All manuals and user guides at all-guides.com 18. Route the end of the High Cable (48) with the loop down through the indicated slot in the Top Frame (6). Wrap the High Cable around a 90mm Pulley (50) in the direction shown. Attach the Pulley inside the Slot welded bracket on the Top Frame (6) with an M10 x 45mm Bolt (59) and an M10 Nylon Locknut (60).
  • Page 13 All manuals and user guides at all-guides.com 22. Identify the Low Cable (40), which is the only remain- ing Cable. Note that there is a loop on one end of the cable and a ball on the other. Route the end of the Low Cable (40) with the ball under a 90mm Pulley (50) as shown.
  • Page 14 All manuals and user guides at all-guides.com 26. Wrap the Low Cable (40) around a 90mm Pulley (50) in the direction shown. Attach the Pulley and two Pulley Covers (28) to the lowest holes in the Pulley Plates (25) with an M10 x 50mm Bolt (54) and an M10 Nylon Locknut (60).
  • Page 15 All manuals and user guides at all-guides.com 29. Insert an M6 x 38mm Carriage Bolt (74) into the centre hole in each Seat Plate (23). Attach each Seat Plate to the Seat (19) with two M6 x 15mm Screws (78). Turn the Seat (19) so the wide end is in the position shown.

  • Page 16: Cable Diagram

    All manuals and user guides at all-guides.com Cable Diagram The cable diagram below shows the proper routing of the High Cable (48), the Butterfly Cable (47), and the Low Cable (40). The numbers show the correct route for each Cable. Make sure that the Cables are routed cor- rectly, that the pulleys move smoothly, and that the pulley covers do not touch or bind the Cables.

  • Page 17: Adjustment

    All manuals and user guides at all-guides.com Adjustment The instructions below describe how each part of the training system can be adjusted. Refer to the exercise guide accompanying this manual to see how the training system should be set up for each exercise. IMPOR- TANT: When attaching the lat bar, row bar, ankle strap, or handle, make sure that the attachments are in the correct starting position for the exercise to be performed.

  • Page 18: Weight Resistance Chart

    All manuals and user guides at all-guides.com Setting Up the Training System for Press Exercises To use the Arms (10, 11) for press exercises, first lift the Locking Plate (29) until it disengages the slot in the Butterfly/Press Frame (9). Insert the Butterfly Locking Pins (81) into the indicated holes in the Butterfly/Press Frame (9) and down into the Arms.

  • Page 19: Maintenance And Trouble-Shooting

    All manuals and user guides at all-guides.com Maintenance and Trouble-shooting Inspect and tighten all parts each time you use the training system. Replace any worn parts immediately. The training system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. Tightening the Cables Woven cable, the type of cable used on the training system, can stretch slightly when it is first used.
  • Page 20 All manuals and user guides at all-guides.com Part Identification Chart—WEEMSY70080 R0601A M6 Nylon Locknut (79)–4 M6 x 65mm Screw (76)–2 M6 Flat Washer (80)–4 M6 x 38mm Carriage Bolt (74)–2 ST5 x 15mm Screw (82)–1 M6 x 35mm Screw (77)–2 M8 Flat Washer (72)–3 M6 x 15mm Screw (78)–4 M8 Nylon Locknut (70)–18...
  • Page 21 All manuals and user guides at all-guides.com M10 x 45mm Bolt (59)–1 25mm Washer (85)–2 M10 x 50mm Bolt (54)–8 M10 Nylon Locknut (60)–18 M10 x 65mm Bolt (58)–2 M10 Flat Washer (62)–12 M10 x 70mm Bolt (57)–2 Long Metal Spacer (49)–2 M10 x 80mm Bolt (56)–3 M10 x 95mm Bolt (55)–1 M10 x 125mm Bolt (51)–1...
  • Page 22 All manuals and user guides at all-guides.com Weight Bumper (44)–2 50mm Square Cover Cap (35)–4 Bumper (45)–1 25mm x 50mm Cover Cap (53)–1 45mm Square Inner Cap (38)–5 Adjustment Tube Cap (43)–1 2 3/4” Plastic Sleeve (46)–2 50mm Square Inner Cap (37)–3 25mm Round Inner Cap (41)–14 19mm Round Inner Cap (42)–4...
  • Page 23 All manuals and user guides at all-guides.com Part List—Model No. WEEMSY70080 R0601A Key No. Qty. Description Key No. Qty. Description Base Bumper Front Stabiliser 2 3/4” Plastic Sleeve Rear Stabiliser Butterfly Cable Front Upright High Cable Rear Upright Long Metal Spacer Top Frame 90mm Pulley Seat Frame...
  • Page 24 All manuals and user guides at all-guides.com Exploded Drawing—Model No. WEEMSY70080 R0601A...

  • Page 25: How To Order Replacement Parts

    Fax: 0113-2411120 When ordering parts, please be prepared to give the following information: • The MODEL NUMBER of the product (WEEMSY70080) • The NAME of the product (WEIDER X2 training system) ® • The SERIAL NUMBER of the product (see the front cover of this manual) •...

This manual is also suitable for:

Weemsy70080