Pcl5E Specific Options; Text Wrapping; Left Margin; Right Margin - Toshiba e-Studio 350 Printing Manual

Example: The command to set the pure black mode is "lp –o pureblackgray=1 filename".

PCL5e Specific Options

Some of the options only apply to plain text or PCL5e files.

— Text Wrapping

The following options control text wrapping when it reaches the right margin.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify wrapping is "lp –o wrap filename".

— Left Margin

The left margin position can be specified with the following option.
If the left margin is set to the right of the right margin it will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the left margin to five columns is "lp –o lm=5 filename".

— Right Margin

The right margin position can be specified with the following option.
If the right margin is set to the left of the left margin or if it is set to a position wider than the log-
ical page it will be ignored. The right margin is specified in columns from the left margin. A
negative value will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the right margin to fifty columns is "lp –o rm=50 filename".
320
For e-STUDIO450 Series and e-STUDIO280 Series:
The "Pure Black and Pure Gray" option is not available for e-STUDIO450 Series and
e-STUDIO280 Series.
Option Value Alternate
Value
wrap
nowrap
Option Value Alternate
Value
lm=value
Option Value Alternate
Value
rm=value
Description
Enable automatic text wrapping.
Disable automatic text wrapping.
Description
Set the left margin to value columns.
Description
Set the right margin to value columns.
Printing Guide — Printing from UNIX