Toshiba e-Studio 350 Printing Manual page 93

•
SUPPLEMENT:
•
NOTE:
Printing Guide — Installing Client Software for Windows
For e-STUDIO450 Series and e-STUDIO280 Series:
•
The PCL5c printer driver is not available for e-STUDIO450 Series and e-STUDIO280
Series.
•
Agfa Font Manager is not included in the Client1 CD-ROM. You must install it from the
Font CD-ROM that comes with the Printer Kit or Printer/Scanner Kit.
8.
Click [Browse].
• The Browse for Folder dialog box appears.
You can also automatically specify the network queue by searching the equipment
in the network.
P.95 "Using the Discovery Functions to Specify the SMB Port"
9.
Locate this equipment in your network, select the "print"
queue, and click [OK].
Do not select "pcl5c", "pcl6", or "ps3" queue. These queues only accept the print job
in each emulation. If you install several printer drivers and specify one of these
queues, the print job may not be printed properly due to mismatch of the emulations
between the print job and queue.
93