Toshiba e-Studio 350 Printing Manual page 322

•
•
•
•
•
•
•
NOTES:
•
•
•
•
Banner Options
The banner page can be printed using the following options.
The default value for this option is that the banner page prints first.
Banner Paper Source
The banner paper source can be specified using the following option.
322
The paper source and the media type for the banner page can be set to different values than
the job's paper source and media type.
Auto paper source selection or the requested banner page source or media type.
Output bin as requested by the "-o" parameter or the printer default value.
6 lines per inch
Auto-wrap on.
Automatic carriage-return when a line-feed is sent.
The banner page is designed to fit Statement / A5 and bigger paper. If the paper
selected is smaller, the banner page may wrap onto two (2) pages.
The default is that the banner page is printed before the job so that it is in the correct
stacking order.
When the language is set to "raw" the banner is always disabled.
The paper source and the media type for the banner page can be set to different
values than the job's paper source and media type. If a banner paper source is not
specified then the auto source command is sent. If a banner media type is not spec-
ified then no banner media type command is sent, so the printer's default value will
be used.
If the file being printed specifies the paper destination or the paper size internally the
banner page may print to the wrong output or on an incorrect paper size.
Option Value Alternate
Value
banner=last
banner=first banner
nobanner nb
Option Value Alternate
Value
bauto-source
btandem
bexternal
bupper bcas1
blower bcas2
bpedupper bcas3
bpedlower bcas4
Description
Print the banner page after the job so that it will be physically on
top of the job in the output tray.
Print the banner page before the job so that it will be physically
under the job in the output tray.
Do not print a banner. The ability to specify the "nobanner"
option can be disabled by the system administrator to force all
jobs to print with a banner.
Description
Select the auto paper tray selection.
Select the large capacity feeder.
Select the upper drawer.
Select the upper drawer.
Select the lower drawer.
Select the upper pedestal drawer.
Select the lower pedestal drawer.
Printing Guide — Printing from UNIX