Adding new device by searching the printer automatically
•
SUPPLEMENT:
•
Printing Guide — Monitoring Print Jobs with TopAccessDocMon
1.
Click [Add Device] in the Device Status tab.
•
The TopAccessDocMon Network Discovery dialog box appears.
2.
Click [Start Discovery] to begin the process.
•
TopAccessDocMon locates the compatible printers in your network.
You can quit the process by clicking [Stop Discovery].
It may not find the device that is located in the different segment. If a device cannot
be found, find a device manually from the [Manual Selection] button.
P.345 "Adding new device by entering the printer address manually"
3.
When the process is complete, the printers that have been
found are listed in the "Discovered Device" list.
343