Installing The Client Software For Usb Printing - Toshiba e-Studio 350 Printing Manual

14.
15.
16.
•
NOTE:

Installing the Client Software for USB Printing

This section describes how to set up the printer drivers when this equipment is connected with
USB cable.
To set up the printer drivers for USB printing, you must install the printer drivers by Plug and
Play functions instead of installing the client software using the installer in the Client1
CD-ROM.
When this equipment is connected to a USB port of Windows 98, Windows Me, Windows 2000,
Windows XP, or Windows Server 2003 computers, the Plug and Play Wizard automatically
starts. You can install a printer driver using this method but other client software cannot be
installed.
Printing Guide — Installing Client Software for Windows
Select "Yes" to print a test page and click [Next].
Click [Finish].
• Start copying files.
The installation is completed.
Before using the printer driver for printing, please configure the installed options of
the equipment and department code (if required) on the printer driver.
P.204 "Before Using the Printer Driver"
53