Lexmark MX710 User Manual page 274

Troubleshooting
•
From the printer control panel, touch Continue to clear the message and print using a different tray.
• Cancel the print job.
Insert Tray [x]
Try one or more of the following:
•
Insert the specified tray into the printer.
• Cancel the print job.
• Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
Install duplex
Try one or more of the following:
•
Install the duplex unit:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the duplex unit.
4
Connect the power cord to a properly grounded electrical outlet.
5
Restart the printer.
•
Cancel the current job.
•
Reset the active bin.
Install Tray [x]
Try one or more of the following:
•
Install the specified tray:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
• Cancel the print job.
•
Reset the active bin.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to stop the defragmentation and continue printing.
• Delete fonts, macros, and other data in the printer memory.
•
Install additional printer memory.
274