Lexmark MX710 User Manual page 207

Understanding the printer menus
Use
Sides (Duplex)
Off
Long Edge
Short Edge
JPEG Quality
Best for content
5–90
Text Default
5–90
Text/Photo Default
5–90
Photo Default
5–90
Use Multi‑Page TIFF
On
Off
Transmission Log
Print log
Do not print log
Print only for error
Log Paper Source
Tray [x]
Manual Feeder
Log Output Bin
Standard Bin
Bin [x]
To
Specify the page orientation of text and graphics.
Notes:
•
Off is the factory default setting.
•
Long Edge assumes binding along the long edge of the page (left edge for
portrait and top edge for landscape ).
•
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape ).
Set the quality of a JPEG photo image in relation to the file size and quality of the
image.
Notes:
• "Best for content" is the factory default setting.
•
5 reduces the file size, but the quality of the image is lessened.
•
90 provides the best image quality, but the file size is very large.
• This menu setting applies to all scan functions.
Set the quality of the text in relation to the file size and quality of the image.
Note: 75 is the factory default setting.
Set the quality of a text/photo image in relation to the file size and quality of the
image.
Note: 75 is the factory default setting.
Set the quality of a photo image in relation to the file size and quality of the image.
Note: 50 is the factory default setting.
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a
multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages,
or multiple TIFF files are created with one file for each page of the job.
Notes:
•
On is the factory default setting.
• This menu setting applies to all scan functions.
Specify whether the transmission log prints.
Note: "Print log" is the factory default setting.
Specify a paper source when printing FTP logs.
Note: Tray 1 is the factory default setting.
Specify the bin for FTP logs.
Notes:
•
Standard Bin is the factory default setting.
•
Bin [x] only appears when at least one optional bin is installed.
207