Installing A Bbu - Fujitsu PRIMERGY TX300 S6 Options Manual

Expansion cards and BBU
8.2

Installing a BBU

V
CAUTION!
Do not connect the cable using excessive force, the connector is
weak.
Follow the safety instructions in the
page 19.
The Battery Backup Unit (BBU) backs up the memory contents of the SAS/SATA
RAID controller in the event of a power failure.
One BBU can be installed for each SAS/SATA RAID controller. A maximum of
three BBUs can be installed for each system.
Ê Open the server and remove the fan carrier as described in the
"Preparation" on page
Figure 51: Removing the BBU carrier plate
Ê Loosen the screw and remove the BBU carrier plate from the housing.
TX300 S6
27.
Options Guide
Installing a BBU
chapter "Safety instructions" on
chapter
79