Fujitsu PRIMERGY TX300 S6 Options Manual page 67

Accessible drives and LSD/LSP
Figure 41: Connecting the I
Ê Remove the cable tie of the I
2
Ê Connect the I
plans in the Appendix).
Ê Attach the front cover or the rack front cover as described in the
"Attaching the front cover" on page 108
front cover" on page
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX300 S6
2
C cable to the LSP/LSD
2
C cable near the CON.4 connector.
C cable CON.4 connector to the LSP/LSD (see the cabling
111.
Options Guide
or in the section "Attaching the rack
105.
Multibay 1
section
67