Fujitsu PRIMERGY TX300 S6 Options Manual page 71

Accessible drives and LSD/LSP
Figure 44: Cabling SAS cable
Ê Connect the SAS cable included to the connector X1 of the HDD backplane
of the Multibay 2 (1).
Ê Connect the SAS cable included to the connector MLC2 of the 3.5-inch HDD
backplane (2).
Ê Route the SAS cable through the cable guides as shown.
Ê Connect the SAS cable to the connector MLC2 of the RAID controller (3).
Ê Reinstall the cable cover as described on
Ê Reinstall the fan carrier as described in the
on page 105.
Ê Attach the front cover or the rack front cover as described in the
"Attaching the front cover" on page 108
front cover" on page
TX300 S6
111.
Options Guide
HDD extension box
page 91.
section "Installing the fan carrier"
or in the section "Attaching the rack
section
71