Fujitsu PRIMERGY TX300 S6 Options Manual page 77

Expansion cards and BBU
Ê Open the server as described in the
Figure 49: Removing the slot cover
Ê Open the slot locking bar in the direction of the arrow (1).
Ê Remove the slot locking bar.
Ê Remove the slot cover (2).
V
CAUTION!
Keep the slot cover for further use. If the expansion card is removed
again and not replaced with a new one, the slot cover has to be
reinstalled to comply with applicable EMC regulations and satisfy
cooling requirements and fire protection measures.
Ê Unpack the new expansion card, and make the desired settings. You should
read the accompanying documentation supplied with the expansion card
beforehand.
TX300 S6
chapter "Preparation" on page
Options Guide
Installing expansion cards
27.
77