Fujitsu PRIMERGY TX300 S6 Options Manual page 104

Conversion from a floorstand model to a rack model
To enable the rack model to be shown correctly in ServerView Management
user interfaces, proceed as follows:
Ê Boot the system from the ServerView Suite DVD1. The ServerView
Installation Manager is started.
Ê In the first window, select your preferred GUI language.
Ê Select "No status backup" under "Status backup media", and continue by
choosing "Continue".
Ê Select "Maintenance".
Ê Select "Server Configuration Manager".
Ê Activate the box for the rack model and store the setting with choosing
"Save".
104 Options Guide
TX300 S6