Fujitsu PRIMERGY TX300 S6 Options Manual page 91

Expansion cards and BBU
Figure 64: Inserting and fastening the cable cover
Ê Insert the cable cover in the recesses.
Ê Close the cable cover at the top.
Ê Make sure that the third guide engages in the recess of the cable guide (see
circle).
Ê Secure the cable cover with the knurled screw.
Ê Reinstall the fan carrier as described in the
on page 105.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX300 S6
section "Installing the fan carrier"
105.
Options Guide
Installing a BBU
91