Overview; Feature Summary - Intel D810E2CA3 Specification

Intel Desktop Board D810E2CA3 Technical Product Specification

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the D810E2CA3 board's major features.
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
I/O Control
Video
Audio
Peripheral Interfaces
Expansion
Capabilities
BIOS
Instantly Available PC
For information about
The board's compliance level with ACPI, APM, Plug and Play, and SMBIOS
12
microATX (9.6 inches by 8.0 inches)
®
Support for either an Intel
(FC-PGA) package or an Intel
a PPGA package
Two 168-pin Dual Inline Memory Module (DIMM) sockets
Support for up to 512 MB of 100 MHz non-ECC, unbuffered synchronous
DRAM (SDRAM)
Support for serial presence detect (SPD) and non-SPD DIMMs
®
The Intel 810E2 chipset, consisting of:
®
Intel 82810E DC-133 Graphics and Memory Controller Hub (GMCH)
®
Intel 82801BA I/O Controller Hub (ICH2)
SST 49LF004A 4 Mbit firmware hub (FWH)
SMSC LPC47M102 low pin count (LPC) interface I/O controller
Intel 82810E DC-133 Graphics and Memory Controller Hub (integrated in the
chipset) with an optional 4 MB of 133 MHz display cache
Intel 82801BA ICH2 digital controller (AC link output)
Analog Devices AD1885 Audio Codec
Four Universal Serial Bus (USB) ports
Two IDE interfaces with Ultra DMA, ATA-66/100 support
One diskette drive interface
Two serial ports
One parallel port
PS/2 keyboard and mouse ports
Four PCI-bus add-in card connectors
Intel/AMI BIOS stored in an SST 49LF004A 4 Mbit firmware hub (FWH)
Support for SMBIOS, Advanced Configuration and Power Management
Interface (ACPI), Advanced Power Management (APM), and Plug and Play
Support for PCI Local Bus Specification Revision 2.2
Suspend to RAM support
†
Wake on PS/2 keyboard and USB ports
®
Pentium III processor in a Flip Chip Pin Grid Array
® ™
Celeron processor in an FC-PGA package or
Refer to
Table 3, page 16