Boot Menu - Intel D810E2CA3 Specification

Desktop board
Table of Contents

Advertisement

4.7 Boot Menu

To access this menu, select Boot from the menu bar at the top of the screen.
Maintenance
The menu represented in Table 72 is used to set the boot features and the boot sequence.
Table 72.

Boot Menu

Feature
Options
Quiet Boot
Intel Rapid BIOS
Boot
Scan User Flash
Area
After Power
Failure
On Modem Ring
On LAN
On PME
st
1
Boot Device
nd
2
Boot Device
rd
3
Boot Device
th
4
Boot Device
th
5
Boot Device
Main
Advanced
Description
Disabled
Disabled displays normal POST messages.
Enabled (default)
Enabled displays the OEM logo instead of POST messages.
Disabled
Enables the computer to boot without running certain POST
tests.
Enabled (default)
Disabled (default)
Enables the BIOS to scan the flash memory for user binary
files that are executed at boot time.
Enabled
Stays Off
Specifies the mode of operation if an AC/Power loss occurs.
Power On restores power to the computer.
Last State (default)
Stay Off keeps the power off until the power button is
Power On
pressed.
Last State restores the previous power state before power
loss occurred.
Stay Off (default)
Specifies how the computer responds to an incoming call on
an installed modem when the power is off.
Power On
Stay Off (default)
Specifies how the computer responds to a LAN wakeup
event when the power is off.
Power On
Stay Off (default)
Specifies how the computer responds to a PME wakeup
event when the power is off.
Power On
Floppy
Specifies the boot sequence from the available devices. To
specify boot sequence:
(Note 1)
ARMD-FDD
1.
(Note 2)
ARMD-HDD
2.
IDE-HDD
ATAPI CD-ROM
The operating system assigns a drive letter to each boot
Intel UNDI, PXE 2.0
device in the order listed. Changing the order of the devices
(Note 3)
(build 071)
changes the drive lettering.
Disabled
The default settings for the first through fifth boot devices
are, respectively:
Security
Power
Select the boot device with < > or < >.
Press <Enter> to set the selection as the intended boot
device.
Floppy
IDE-HDD
ATAPI CD-ROM
Intel UNDI
Disabled
BIOS Setup Program
Exit
Boot
continued
101

Advertisement

Table of Contents
loading

Table of Contents