Power Menu - Intel D810E2CA3 Specification

Intel Desktop Board D810E2CA3 Technical Product Specification

4.6 Power Menu

To access this menu, select Power from the menu bar at the top of the screen.
Maintenance
The menu represented in Table 71 is used to set the power management features.
Table 71.

Power Menu

Feature
Power Management
Inactivity Timer
Hard Drive
ACPI Suspend State
Video Repost
Note: Power Management, Inactivity Timer, and Hard Drive features apply only for APM operating systems.
100
Main Advanced
Options
Disabled
Enabled (default)
Off
1 Minute
5 Minutes
10 Minutes
20 Minutes (default)
30 Minutes
60 Minutes
120 Minutes
Disabled
Enabled (default)
S1 State (default)
S3 State
Disabled (default)
Enabled
Security
Power
Description
Enables or disables the APM BIOS power management
(Note)
feature.
Specifies the amount of time before the computer
enters standby mode, when APM power management
(Note)
is active.
Enables or disables power management for hard disks
during standby and suspend modes, when APM power
(Note)
management is active.
Selects the suspend state the system will use when
ACPI power management is active. To enable an
instantly available configuration, this must be set to the
S3 state and an operating system which fully supports
the ACPI S3 suspend state must be installed.
Allows video BIOS to be initialized coming out of S3.
This option is present only when ACPI Suspend State
is set to S3.
Boot Exit