Ricoh Aficio MP C5502 User Manual page 654

7. Managing the Machine
Disabling Log Transfer to the Log Collection Server
Use the following procedure to disable log transfer to the log collection server. Note that you can
change the log transfer setting to [Inactive] only if it is already set to [Active].
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Inactive] under "Transfer Logs".
5. Click [OK].
6. Log out.
Specifying log encryption
Use the following procedure to enable/disable log encryption.
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Active] when encrypting the logs.
To disable log encryption, select [Inactive].
5. Click [OK].
A confirmation message appears.
6. Click [OK].
7. Log out.
• To encrypt the logs, it is necessary to make the collection setting active for each of the job logs,
access logs, and/or eco-friendly log.
• If the data stored in the machine has been encrypted, the log files will still be encrypted, regardless
of this setting.
Deleting all logs
Use the following procedure to delete all logs stored in the machine.
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
210