Ricoh Aficio MP C5502 User Manual page 292

Message
"The entered file name
contains invalid character(s).
Enter the file name again
using any of the following 1
byte characters. " 0 to 9 ", "
A to Z ", " a to z ", " . - _""
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
"Transmission has failed.
Insufficient memory in the
destination hard disk. To
check the current status,
press [Scanned Files
Status]."
"Transmission has failed. To
check the current status,
press [Scanned Files
Status]."
Causes
The file name contains a
character that cannot be
used.
You have tried to delete files
without the authority to do
so.
Transmission has failed.
There was not enough free
space on the hard disk of the
SMTP server, FTP server, or
client computer at the
destination.
While a file was being sent,
a network error occurred
and the file could not be sent
correctly.
When Messages Are Displayed on the Control Panel
Solutions
Check the file name specified at the
time of scanning. The file name
specified in the Sending Scan Files to
Folders function cannot contain the
following characters:
\ / : * ? " < > |
The file name cannot start or end with a
period ".".
To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide
Allocate sufficient space.
If the same message appears again
after scanning again, the cause could
be a mixed network, or else network
settings were changed during WSD
scanner transmission. For details about
network error, contact your
administrator.
.
221