Ricoh Aficio MP C5502 User Manual page 286

Message
"Exceeded max. E-mail size.
Sending E-mail has been
cancelled. Check [Max. E-
mail Size] in Scanner
Features."
"Exceeded max. No. of
results to display. Max.: n"
(A figure is placed at n.)
"Exceeded max. data
capacity. Check scanning
resolution, then press Start
key again."
"Exceeded max. data
capacity. Check the
scanning resolution, then
reset original(s)."
"Exceeded max. number of
alphanumeric characters for
the path."
Causes
The file size per page has
reached the maximum e-
mail size specified in
[Scanner Features].
Search results have
exceeded the max.
displayable number.
The scanned data exceeded
maximum data capacity.
The scanned original
exceeded maximum data
capacity.
The maximum number of
specifiable alphanumeric
characters in a path has
been exceeded.
When Messages Are Displayed on the Control Panel
Solutions
Change the facsimile features settings
as follows:
• Increase the e-mail size limit in
[Max. E-mail Size].
• Change the [Divide & Send E-
mail] setting to [Yes (per Page)] or
[Yes (per Max. Size)]. For details
about these settings, see "Send
Settings", Scan .
Search again after changing the
search conditions.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. For details about the settings
for scan function, see "Relationship
between Resolution and Scan Size",
Scan .
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. For details about the settings
for scan function, see "Relationship
between Resolution and Scan Size",
Scan .
The maximum number of characters
which can be entered for the path is
256. Check the number of characters
you entered, and then enter the path
again.
215