Protocol Port Configuration Screen - Enterasys SmartSwitch 2200 Management Supplement

2.4

PROTOCOL PORT CONFIGURATION SCREEN

The Protocol Port Configuration screen
a. display the ports,
b. show which ports are set to the line item containing the VID/ Classification (classification
rule) of interest in the VLAN Classification Configuration screen described in
c. add or remove ports from being associated with the classification rule, and
d. add ports to the VLAN Forwarding List of the SmartSwitch device.
NOTE: The ports can only be added to the VLAN Forwarding List of an existing VLAN. If
the VLAN does not exist, it must be created before the ports can be assigned to the
VLAN Forwarding List.
To access the Protocol Port Configuration screen from the VLAN Classification Configuration
screen, use the arrow keys to highlight the line item of interest in the VLAN Classification
Configuration screen and press ENTER. The Protocol Port Configuration screen displays.
Figure 2-4 Protocol Port Configuration Screen
(Figure 2-4) is used to:
Protocol Port Configuration Screen
Local Management Screens
Section 2.3,
2-13