Configuring Snmp Access Rights; Purpose; Commands; Show Snmp Access - Enterasys SecureStack C2 Configuration Manual

Configuring SNMP Access Rights

Purpose

To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.

Commands

For information about...

show snmp access

set snmp access
clear snmp access
show snmp access
Use this command to display access rights and security levels configured for SNMP one or more
groups.
Syntax
show snmp access [groupname] [security-model {v1 | v2c | usm}] [noauthentication
| authentication | privacy] [context context] [volatile | nonvolatile | read-only]
Parameters
groupname
security‐model v1 |
v2c | usm
noauthentication |
authentication |
privacy
context context
volatile |
nonvolatile | read‐
only
Defaults
If groupname is not specified, access information for all SNMP groups will be displayed.
If security‐model is not specified, access information for all SNMP versions will be displayed.
If noauthentication, authentication or privacy are not specified, access information for all
security levels will be displayed.
If context is not specified, all contexts will be displayed.
(Optional) Displays access information for a specific SNMPv3 group.
(Optional) Displays access information for SNMP security model version
1, 2c or 3 (usm).
(Optional) Displays access information for a specific security level.
(Optional) Displays access information for a specific context. For a
description of how to specify SNMP contexts, refer to "Using SNMP
Contexts to Access Specific MIBs" on page 6‐3.
(Optional) Displays access entries for a specific storage type.
Configuring SNMP Access Rights
Refer to page...
6-15
6-17
6-18
SecureStack C2 Configuration Guide 6-15