Craftsman 113.248212 Owner's Manual page 21

4 Loosen the setscrew which locks the blade guide
support and push the support all the way back
Repeat for lower blade guide support
uPPE.BLAOE !l !
GU,O SUPPORT il Z.
SETSOR W
LOWER BLADE
GUIDE SUPPORT
=°_ SETSCREW
5 Loosen the setscrew which locks the upper back
up bearing and push the bearing all the way
back Repeat procedure for lower back up bear-
ing
_f UPPER BACKUP
BEARING SETSCREW
WARNING: To avold serious eye Injury or scrapes
if the blade should suddenly uncoil, wear safety
goggles, Carefully uncoll the blade holding it at
arms length.
6 Uncoil the blade
7 Place the blade over the wheels with the teeth point-
ing downwards toward the table as shown. Make
sure the blade is between the blade guides and is in
the center of the rubber tires
NOTE: If the blade will not reach around both wheels,
lower the upper wheel by turning the tension knob
counterclockwise
BLADE CENTERED
ON RUBBER TIRE
21