Download Print this page

Specifications; Productspecifications; Commonservice Parts - Briggs & Stratton Inverter Generator Operator's Manual

Inverter generator
Hide thumbs Also See for Inverter Generator:

Advertisement

Available languages

Available languages

ProductSpecifications
Starting Wattage ........................
2,000 Watts
Wattage* . .............................
1,600 Watts
Load Current:
at 120 Volts AC ........................
13.3 Amps
at 12 Volts DO ...........................
5 Amps
Rated Frequency .........................
60 Hertz
Phase ................................
Single Phase
Displacement ..................
6.44 cu. in. _105.6cc)
Spark Plug Gap ...........
0.023°0.027 in. _0.6-0.7 ram)
Intake Valve Clearance ..............
0.0031 - 0.0047 in.
_0.08=0.12 mm_ cow
Exhaust Valve Clearance.............
0.0051 - 0.0067 in.
(0.13 =0.17 mm_ cold
Fuel Capacity ..................
1.0 U.S. gallon (3.7 L)
Oil Capacity .......................
13.5 Ounces (0.4 L)
CommonService Parts
Foam Air Cleaner .........................
311388GS
Breather FiUter............................
311389GS
Resistor Spark Hug
...................
NGK CR7HSA
Engine Oil Bottle ...................
100005 or 100028
Synthetic Oil Bottle ..........................
100074
Fuel Stabilizer .......................
100002 or 5041
Pewer Ratings: The gross power rating for individual gas engine models is labeled in accordancewith SAE (Society of
Automotive Engineers)code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordancewith SAEJ1995 (Revision 2002°05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient
operating conditions and engine-to-enginevariability. Given both the wide array of products on which enginesare placed and
the variety of environmental issues applicableto operating the equipment, the gas engine will not developthe rated gross power
when used in a given pieceof power equipment (actual "on-site"or net power). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-enginevariability. Due to
manufacturing and capacity limitations, Bdggs & Stratton may substitute an engine of higher rated power for this Series engine.
* This generator is rated in accordancewith CSA (CanadianStandards Association) standard 022.2 No. 100-04 (motors and
generators).
Briggs & StrattenPower ProductsGroup, LLC
P.O. Box 7B2
IViiiwaukee,Wisconsin, 532B1-B702 U.S.A.
24
(800) 743-4115
BRIGGSandSTRATTON.COM

Advertisement

loading

This manual is also suitable for:

P2000