Scandiva Twain Driver Setup; Trademark Acknowledgments; System Environment - Konica Minolta ScanDIVA User Manual

ScanDIVA User's Guide

1 ScanDIVA TWAIN Driver Setup

The ScanDIVA TWAIN Driver hereinafter referred to as "the Driver" must be installed on the Personal
Computer connected to the Scanner to read images from it via TWAIN scanning. This chapter
describes the system requirements of the Personal Computer and the installation procedure of the
Driver.
1.1

Trademark Acknowledgments

IBM and IBM PC/AT are registered trademarks of International Business Machines
Corporation.
Microsoft, Windows, Windows XP, Windows Vista and Windows 7 are registered trademarks of
Microsoft Corporation.
All other brand or product names are trademarks or registered trademarks of their respective
companies or organizations
1.2

System Environment

The following are the minimum system requirements for the computer connected to the Scanner
to install the Driver. The operator should be completely familiar with basic Windows operations.
Computer
OS
CPU
Memory
Hard disk drive
Interface
Optical disc drive
Display
Application software
Recommended System Requirements
CPU
Memory
Hard disk drive
Video Card
Display
3-2
Compatible with IBM PC/AT
Windows 7: 32 bit, 64 bit
Windows Vista: 32 bit, 64 bit SP2 or later
Windows XP: 32 bit SP3 or later
INTEL Core i7 or greater
4 GB or greater
2 GB of available hard disk space
Hi-Speed USB 2.0
CD-ROM drive
Display that has a screen resolution of 1,280 x 1,024 or
greater
Application software compatible with TWAIN32
INTEL Core i7 2.93 GHz or faster
4 GB or greater
SATA 3 7200 rpm or greater
GeForce GT430 1 GB or greater
Display that has a screen resolution of 1,920 x 1,080