Konica Minolta ScanDIVA User Manual page 51

2
Align the top of the
Gray Scale with
this line.
Place the Test Chart on the adjustment plate and the Gray Scale accordingly.
Adjust the top of the Test Chart along with the Adjustment Plate.
Be sure to adjust the center of the cradle to the center of the Test
Chart.
Center the Gray Scale on the Test Chart as shown in the illustration above.
When the Glass Plate Unit has been attached, place the Test Chart and the Gray
Scale on the Adjustment Plate, and close the Glass Plate Unit.
Chapter 3 ScanDIVA TWAIN Driver
3-21