Using The Operation Panel; Making Scanning Condition Settings - Konica Minolta ScanDIVA User Manual

ScanDIVA User's Guide

3 Using the Operation Panel

The Operation Panel can be used to set scanning conditions.
Scanning conditions can be set from the Operation Panel when the "READY"
screen is displayed.
NOTE !
3.1

Making scanning condition settings

Key descriptions
SET
ESC
Pressing the "SET" key while the "READY" screen is displayed displays the
settings menu.
The settings menu contains the following 6 items: "PAGE", "SIZE", "MODE",
"BOOK CORRECT", "FRAME MASKING", and "CENTER ERASE"
4-6
The Operation Panel cannot be used if the following message is

displayed on the panel:
If you wish to use a disabled Operation Panel, please contact your

authorized service representative.
Highlight the item to be set.
Select the highlighted item.
Return to the settings menu.