Table of Contents
Advertisement
ScanDIVA User's Guide
2.4
CCD Gain
This adjustment is to match the sensitivity of the CCD to the luminance of the
installation location.
1
NOTE !
When the Glass Plate Unit has been attached, open the Glass Plate Unit, and place
the Adjustment Plate on the cradle.
3-12
Assemble the Adjustment Plate and place it on the cradle.
For the procedure to assemble the Adjustment Plate, refer to "2.1
Assembling the Adjustment Plate" and "2.2 Placing the Adjustment
Plate" in Chapter 7 "2 Appendix"
Advertisement
Table of Contents
Troubleshooting
