Setting Status Read Command; Cr_Lang Command; Cr_Logo Command; Cr_Logolock Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Expand Serial Command Functional Specifications

9.11 Setting Status Read Command

9.11.1 CR_LANG Command

Command "CR_LANG" [CR]
Details Get selected language
Acceptable
Response %1
Unacceptable

9.11.2 CR_LOGO Command

Command "CR_LOGO" [CR]
Details Get setting status of Logo
Acceptable
Response %1
Unacceptable

9.11.3 CR_LOGOLOCK Command

Command "CR_LOGOLOCK" [CR]
Details Get setting status of Logo Lock function
Acceptable
Response %1
Unacceptable

9.11.4 CR_PIP Command

Command "CR_PIP" [CR]
Details Get setting status of Picture in Picture
Acceptable
Response %1
Unacceptable
"000_%1" [CR]
"ENG" -------------------------- English is selected
"DEU" -------------------------- German is selected
"FRA" -------------------------- French is selected
"ITA" --------------------------- Italian is selected
"ESP" -------------------------- Spanish is selected
"POR" -------------------------- Portuguese is selected
"NED" -------------------------- Dutch is selected
"SVE" -------------------------- Swedish is selected
"JPN" -------------------------- Japanese is selected
"CHI" -------------------------- Chinese is selected
"KOR" -------------------------- Korean is selected
"RUS" -------------------------- Russian is selected
"Error Code" [CR]
"000_%1" [CR]
"DFLT" ----------------------------- Default Logo is enabled
"USER" --------------------------- User is enabled
"OFF" ------------------------------ Logo is disabled
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Logo Lock is ON
"OFF" ------------------------- Logo Lock is OFF
"Error Code" [CR]
"000_%1" [CR]
"OFF" -------------------------------- Off is selected
"PINP" ------------------------------- P in P is selected
"PBYP" ------------------------------ P by P is selected
"Error Code" [CR]
65/75