Cr_Coltemp Command; Cr_Nzred Command; Cr_Progv Command; Cr_Image Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Expand Serial Command Functional Specifications

9.4.10 CR_COLTEMP Command

Command "CR_COLTEMP" [CR]
Details Get Color Temperature setting status
Acceptable
Response %1
Unacceptable

9.4.11 CR_NZRED Command

Command "CR_NZRED" [CR]
Details Get Noise Reduction setting status
Acceptable
Response %1
Unacceptable

9.4.12 CR_PROGV Command

Command "CR_PROGV" [CR]
Details Get Progressive scan setting status
Acceptable
Response %1
Unacceptable

9.4.13 CR_IMAGE Command

Command "CR_IMAGE" [CR]
Details Get image setting status
Acceptable
%1
Response
Unacceptable
"000_%1" [CR]
"000" --------------------------------- Xlow
"001" --------------------------------- Low
"002" --------------------------------- Mid
"003" --------------------------------- High
"BLANK" ---- Processing adjusting White Balance
(Neither of Xlow / Low / Mid / High)
"Error code" [CR]
"000_%1" [CR]
"OFF" ------ Noise Reduction OFF
"L1" -------- Noise Reduction L1
"L2" -------- Noise Reduction L2
"Error code" [CR]
"000_%1" [CR]
"OFF" --------------- Progressive scan OFF
"L1" ----------------- Progressive Mode L1 (for moving image)
"L2" ----------------- Progressive Mode L2 (for still image)
"FILM" -------------- Progressive Model FILM
"Error code" [CR]
"000_%1" [CR]
"DYNAMIC" --------------------------------------- Dynamic
"STAND" ------------------------------------------- Standard
"REAL" --------------------------------------------- Real
"CINEMA" ----------------------------------------- Cinema
"CUSTOM1"~"CUSTOM4" -------------------- Image1~4
"Error Code"[CR] ---- When the command is invalid due to
condition such as Input source
"?"[CR] -------------------- When unclear command is received
48/75