Cf_Keydis Command; Cf_Testpat Command; Cf_Filh Command; Cf_Filtimer Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Expand Serial Command Functional Specifications

8.10.24 CF_KEYDIS Command

Command "CF_KEYDIS_%1" [CR]
"NONE" ---------------------- RC & Projector keys are valid (All are valid)
"RCALL" --------------------- All RC keys are invalid
%1 "RCPART" ------------------- Specific RC keys are invalid
"KEYALL" -------------------- All projector keys are invalid
"KEYPART" ----------------- Specific projector keys are invalid
Set a ban on the use of RC keys/ projector keys
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.10.25 CF_TESTPAT Command

Command "CF_TESTPAT_%1" [CR]
"COLOR" ---------------------- Display Color bar
"GRAD1" ---------------------- Display 16step(white→black)
"GRAD2" ---------------------- Display 16step(white←black)
"GRAD3" ---------------------- Display 16step(white↓black)
"GRAD4" ---------------------- Display 16step(white↑black)
%1 "WHITE" ---------------------- Display all white
"BALCK" ---------------------- Display all black
"CROSS" --------------------- Display Cross
"OFF" --------------------------Do not show test pattern display
"UP" --------------------------- Switch forward
"DN" ---------------------- Switch backward
Details Execute test pattern display.(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.10.26 CF_FILH Command

Command "CF_FILH_%1" [CR]
%1 "RST" ---------------------- Reset Filter used time
Details Reset used time for filter of projector
Acceptable
Response
Unacceptable

8.10.27 CF_FILTIMER Command

Command "CF_FILTIMER_%1" [CR]
"0400" ---------------------- Set 400 hours
"0700" ---------------------- Set 700 hours
%1
"1000" ---------------------- Set 1000 hours
"OFF" ---------------------- Set Off(Do not warning display)
Details Set time to display Filter cleaning / replacement warning on screen
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
42/75