PLC-WTC500L Expand Serial Command Functional Specifications
8.9 Sound Command
8.9.1 CF_VOLUME Command
Command
"CF_VOLUME_%1"[CR]
"000-063" --------------------------- Directly select Volume setting value
%1
"UP" --------------------------------- Current Volume setting value +1
"DN" --------------------------------- Current Volume setting value -1
Control level of volume. (Available only in the normal Power ON status)
Set Volume Up/Down the same way as remote control and also directly select
Details
Volume setting value. When setting Volume value, the Sound Mute ON status is
canceled just like RC operation. The value set by this command is stored in
Projector.
Acceptable
Response
Unacceptable
8.9.2 CF_MUTE Command
Command
"CF_MUTE_%1"[CR]
"ON" ----------------------------- Set Sound Mute ON
%1
"OFF" --------------------------- Set Sound Mute OFF
Details
Control Sound Mute ON/OFF (Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
34/75