PLC-WTC500L Expand Serial Command Functional Specifications
9ÿ
Status Read Command
9.1 Format
1)
PC issues commands in format as below:
"CR_ COMMAND" [CR]
Command: String
2)
When projector receives the appropriate command, it returns the required data as a string.
"000_" %1 [CR]
%1: Required Data (String)
3)
When the received data cannot be decoded, the projector returns "?" [CR]
9.2 Transfer Example
Get total dots of projector by Expand Serial Commands
PC → PJ: "CR_TDOTS" [CR]
PC ← PJ: "000_1344" [CR]
9.3 Operation Condition
1)
Basically it should be always operated.
2)
When Standby mode of Setting menu is set to Eco and Projector status is Standby mode,
Status Read Commands are invalid.
9.4 Image Status Read Command
9.4.1 CR_BRIGHT Command
Command
"CR_BRIGHT" [CR]
Details
Get user controlled value of Brightness
Acceptable
Response
%1
Unacceptable
9.4.2 CR_CONT Command
Command
"CR_CONT" [CR]
Details
Get user controlled value of Contrast
Acceptable
Response
%1
Unacceptable
9.4.3 CR_COLOR Command
Command
"CR_COLOR" [CR]
Details
Get user controlled value of Color
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"000 – 063"
"Error code" [CR]
"000_%1" [CR]
"000 – 063"
"Error code" [CR]
"000_%1" [CR]
"000 – 063"
"Error code" [CR]
46/75