Screen Status Read Command; Cr_Screen Command; Cr_Ceil Command; Cr_Rear Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Expand Serial Command Functional Specifications

9.8 Screen Status Read Command

9.8.1 CR_SCREEN Command

Command "CR_SCREEN" [CR]
Details Get selected screen image size
Acceptable
%1
Response
Unacceptable

9.8.2 CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response %1
Unacceptable

9.8.3 CR_REAR Command

Command "CR_REAR" [CR]
Details Get setting status of Rear function
Acceptable
Response %1
Unacceptable

9.8.4 CR_ KYSTNMODE Command

Command "CR_KYSTNMODE" [CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response %1
Unacceptable

9.8.5 CR_VSCALE Command

Command "CR_VSCALE" [CR]
Details Get setting status of V scale
Acceptable
Response %1
Unacceptable
"000_%1" [CR]
"NORMAL" ---------------------- Normal mode
"ZOOM" -------------------------- Zoom mode
"NATURAL" ---------------------- Natural wide mode
"WIDE" --------------------------- Wide mode
"FULL" --------------------------- Full mode
"TRUE" --------------------------- True mode
"CUSTOM" ----------------------- Custom mode
"Error Code" [CR] --- When command is not available in the
given condition (such as being selected input).
"?" [CR] --- When unknown command is received
"000_%1" [CR]
"ON" --------------------------- Ceiling projection is enabled
"OFF" ------------------------- Ceiling projection is disabled
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Rear projection is enabled
"OFF" ------------------------- Rear projection is disabled
"Error Code" [CR]
"000_%1" [CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"Error Code" [CR]
"000_%1" [CR]
"-32"ÿ "032"
"Error Code" [CR]
59/75