Input 3 Command; Network Command; Volume + Command; Sound Mute On Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Basic Serial Command Functional Specifications

6.10 INPUT 3 Command

Command "C07" [CR]
Select Input 3. This command works differently from the command by "Input 3"
Detail key of the remote control. When Input 3 has been selected, this command does
not execute the source switching; just for switching to Input 3.
Acceptable
Response
Unacceptable

6.11 NETWORK Command

Command "C08" [CR]
Detail Select Network Input
Acceptable
Response
Unacceptable

6.12 VOLUME + Command

Command "C09" [CR]
Volume Up.
Detail This command operates the same way as VOLUME + button of the projector and
remote control.
Acceptable
Response
Unacceptable
6.13 VOLUME – Command
Command "C0A" [CR]
Volume Down
Detail This command operates the same way as VOLUME – button of the projector and
remote control.
Acceptable
Response
Unacceptable

6.14 SOUND MUTE ON Command

Command "C0B" [CR]
Sound Mute ON.
Detail This command works the same way as "MUTE" button of the remote control for
Mute ON, but does not work for Mute OFF.
Acceptable
Response
Unacceptable

6.15 SOUND MUTE OFF Command

Command "C0C" [CR]
Sound Mute OFF.
Detail This command works the same way as "MUTE" button of the remote control for
Mute OFF, but does not work for Mute ON.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
11/25