Network Settings
IPsec SA Settings (IPsec Settings)
A maximum of eight combinations of security protocols and algorithms for
IPsec communication can be stored. Settings can be specified for the follow-
ing.
Parameter
Lifetime After Estab-
lishing SA
Security Protocol
ESP Encryption Al-
gorithm
ESP Authentication
Algorithm
AH Authentication
Algorithm
0 In order to apply the IPsec settings, settings must be specified for "IKE
Settings", "IPsec SA Settings" and "Peer".
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
2
To specify settings, touch [ON], and then touch [IPsec SA Settings].
The IPsec SA Settings screen appears.
C451
Description
Specify the length of time that the key is valid after being generated when
creating communication tunnels.
Select the security protocol.
If "Security Protocol" was set to "ESP", specify the ESP encryption algo-
rithm.
If "Security Protocol" was set to "ESP", specify the ESP authentication
algorithm.
If "Security Protocol" was set to "AH", specify the AH authentication al-
gorithm.
4
4-34