Authentication Device Settings - Konica Minolta bizhub C452 Copy Manual

7.4 User Authentication/Account Track
7.4.8

Authentication Device Settings

Configure the authentication operations when the optional authentication unit is installed.
0 This setting is available when the optional authentication unit is installed.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö
[Authentication Device Settings].
Settings
General Settings
Logoff Settings
bizhub C652/C652DS/C552/C552DS/C452
Card Authentication Displayed when the Authentication Unit (IC card
type) AU-201 is installed.
•
•
Bio Authentication Displayed when Authentication Unit (biometric
type) AU-101 or Authentication Unit (biometric
type) AU-102 is installed.
•
•
Configure whether to log out when scanning of
the original finishes.
IC Card Type
Select the type of the IC card to be used in this
machine. The FeliCa card ([FeliCa], [SSFC],
[FCF], or [FCF (Campus)]) or Type A card
([Type A]) can be selected. If [FeliCa+Type A],
[SSFC+Type A], [FCF+Type A], or [FCF (Cam-
pus)+ Type A] is selected, both the FeliCa and
Type A cards can be used in this machine at
the same time. If [SSFC] or [SSFC+Type A] is
selected, specify [Company Code] or [Com-
pany Identification Code].
Operation Settings
Specify how to log in to this machine. [IC Card
Authentication] allows the user to log in by
simply placing the IC card. [Card Authentica-
tion + Password] allows the user to log in by
placing the IC card and entering the pass-
word.
Beep Sound
Specify whether to output a beep when read-
ing the finger vein pattern.
Operation Settings
Specify how to log in to this machine. [1-to-
many authentication] allows the user to log in
by simply placing his or her finger on the au-
thentication unit. [1-to-1 authentication] al-
lows the user to log in by entering the user
name and placing his or her finger on the au-
thentication unit.
7
7-40