Konica Minolta bizhub C452 Copy Manual page 139

6.3 Copier Settings
Settings
Half-Fold/Tri-Fold Specifi-
cation
Half-Fold Specification
Print Jobs During Copy
Operation
Automatic Image Rotation
Finishing Program
Card Shot Settings
Factory default
Auto Booklet ON when
Fold & Staple
Auto Zoom for Com-
bine/Booklet
Auto Sort/Group Selection
Default Copy Settings
When AMS Direction is In-
correct
Separate Scan Output
Method
Enlargement Rotation
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Tri-Fold Print Side
Half-Fold/Tri-Fold Specifi-
cation
Half-Fold Specification
bizhub C652/C652DS/C552/C552DS/C452
Specify whether to apply Half-Fold/Tri-Fold for all pages together or for
specific pages when handling a job containing multiple pages.
When Booklet is selected simultaneously with Half-Fold, all pages are half-
folded together even if [One Sheet at a Time] is selected.
If the number of original pages exceeds the folding capacity of this ma-
chine, the "Fold" function setting is cancelled automatically, and the sheets
are printed without being folded.
This item is displayed if the Saddle Stitcher SD-508 is installed in the Fin-
isher FS-526.
To change the folding capacity, contact your service representative.
Half-folding capacity setting: 1-3 (default:3)
Tri-folding capacity setting: 1-3 (default:1)
Specify whether to apply Half-Fold together for all pages or for each page
when handling a job containing multiple pages.
When Booklet is selected simultaneously with Half-Fold, all pages are half-
folded together even if [One Sheet at a Time] is selected.
If the number of original pages exceeds the folding capacity of this ma-
chine, the "Fold" function setting is cancelled automatically, and the sheets
are printed without being folded.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
To change the folding capacity, contact your service representative.
Half-folding capacity setting: 1-3 (default:3)
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.
Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is set if the finisher is installed.
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-43.
Auto Select Booklet
Auto Display Zoom Ratio
Yes
Factory Default
Print
Page Print
Allow
OFF
ON
Tray Before APS ON
Tray 2
Inside
Multiple Sheets
Multiple Sheets
6
6-9