Konica Minolta bizhub C452 Copy Manual page 160

7.1 System Settings
Settings
User Paper Settings
Erase Adjustment
Factory default
AE Level Adjustment
Leading Edge Adjustment
Centering
Leading Edge Adjustment
(Duplex Side 2)
Centering (Duplex 2nd
Side)
Media Adjustment
Center Staple Position
Half-Fold Position
Tri-Fold Position Adjust-
ment
Punch Vertical Position Ad-
justment
Punch Horizontal Position
Adjustment
Punch Regist Loop Size
Adjustment
Vertical Punch (Z-Fold) Po-
sition Adjustment
Horizontal Punch (Z-Fold)
Position Adjustment
1st Z-Fold Position Adjust-
ment
2nd Z-Fold Position Ad-
justment
Post Inserter Tray Size Ad-
justment
Density Adjustment
Image Stabilization Only
Image Stabilization Setting
Paper Separation Adjust-
ment
bizhub C652/C652DS/C552/C552DS/C452
Configure special paper settings for User Paper 1 through 6. Settings to
configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
Non-Image Area Erase Opera-
tion Settings
Standard (2)
0.0 mm
0.0 mm
0.0 mm
0.0 mm
Auto
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
For Finisher FS-526
Finisher: 0.0 mm
Finisher (for Z folding): 0.0 mm
Post inserter feeder (Upper tray): 0.0 mm
Post inserter feeder (Lower tray): 0.0 mm
For Finisher FS-527: 0
0.0 mm
0.0 mm
0.0 mm
0.0 mm
Auto Detect
0
Image Stabilization Only
Standard
0.0 mm
Configure Non-Image Area operation
settings.
[Auto]:
Automatically detects the background
density of the original, and selects ei-
ther "Bevel" or "Rectangular" accord-
ingly.
[Specify]:
Allows you to manually specify an
erase method and original density. As
an erase method, select "Bevel" or
"Rectangular". Specify an original
density from five levels.
7
7-12