Konica Minolta bizhub C452 Copy Manual page 147

6.9 Register Authentication Information
3
Register authentication information.
For biometric authentication, place your finger on the Authentication Unit to scan the finger vein pattern.
Scan the finger vein pattern three times; reset the same finger each time and then press [Scan] for each
scanning.
After scanning the finger vein patterns, place the same finger on the authentication unit, and press
[Authentication Test].
If your finger vein patterns have been authenticated in the authentication test, press [Register]. If
authentication has failed, retry scanning the finger.
For IC card authentication, place your IC card on the Authentication Unit, and press [OK].
4
Press [Close].
bizhub C652/C652DS/C552/C552DS/C452
6
6-17