Installing Internal Drives; Figure 14. Removing The Front Cover - Lenovo Aptiva Product Manual

Product guide for aptiva 6864 machine.

Hide thumbs Also See for Aptiva:

Table of Contents

Aptiva S Series 1G Product Guide

Installing Internal Drives

To install an internal drive, you must first remove the side cover and then remove the front cover.

To remove the front cover:

1. Push the plastic locking tabs (visible at the front corner of the system with the side cover

removed) inward.

2. Rotate the front cover away from the front of the system.

3. Disengage the tabs on the other side of the front cover from their slots on the chassis frame and

set the front cover aside.

Table of Contents

Aptiva s series 1g