Lenovo Aptiva Product Manual page 68

Aptiva S Series 1G Product Guide
✏
NOTE
Proper cooling is required for the reliable performance of internal components. Do not operate
your computer with the side cover removed.
With the side over removed, you can:


install and remove adapters


remove and replace the auxiliary fan assembly to access memory


remove and replace the front cover to install and remove internal drives.
Following sections illustrate these processes.
Replacing the side cover is the reverse of removing it. To replace the side cover:
1. Align the side cover against the chassis frame, a few inches behind the normal position of the
side cover when it is installed.
2. Slide the side cover forward until the front edge of the side cover is engaged in the slot in the
front corner of the chassis frame.
3. Replace the two screws you removed when removing the side cover.
4. Connect all the cables you disconnected before removing the side cover.
68