Denso BHT-7500S User Manual page 93

(2) FTP options screen
SET OPTION
1:CR/LF
CR-LF LF CR None
2:CR/LF CODE PROPERTY
Control code Data
3:FIELD SPACE
Ignore Data
4:UPLOAD MODE
Overwrite Append
5:VERBOSE MODE ON
Chapter 2. Getting Started the BHT and System Mode
Selecting "2:OPTION" on the SET FTP menu calls
up the screen shown at left where the current
settings are displayed.
1 CR/LF
2 CR/LF CODE PROPERTY :
OFF
3 FIELD SPACE
4 UPLOAD MODE : Selects whether uploaded
5 VERBOSE MODE : Selects whether reply codes
Select a desired item by using the numerical keys
or and
by using the
To return to the SET FTP menu, press the C key.
73
: Specifies line delimiters that
should match ones used in
the server OS.
Selects whether line delim-
iters inside down-loaded
data records will be treated
as control codes (record de-
limiters) or data.
: Selects whether space codes
in the tail of a downloaded
data field will be trimmed or
handled as data.
files will be written over the
existing files or appended to
them.
& messages (given on page
94) sent by the FTP server
will display on the FTP cli-
ent or not.
If the VERBOSE MODE is set
to OFF, no such replies will
display but only the mes-
sages (given on page 93) is-
sued by the BHT will appear.
If it is set to ON, both will
display.
keys. Then select a desired setting
and keys.