Denso BHT-7500S User Manual page 90

[4.7] Setting the resume function
SET RESUME
1:ON 2:OFF
[4.8] Setting the TCP/IP and FTP (BHT-7500S/7500W only)
SET TCP/IP
1:SET TCP/IP
2:SET FTP
Selecting "7: RESUME" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
1 ON : Activates the resume function which
resumes the current BHT status
when the BHT power was turned
off, when the BHT is switched on.
2 OFF : Deactivates the resume function.
Select a desired item by using the numerical keys
or and keys, and then press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
Selecting "8:TCP/IP" on the SET SYSTEM menu
calls up the screen shown at left.
1 SET TCP/IP : Switches to the TCP/IP setting
screen.
2 SET FTP : Switches to the FTP setting
screen.
Select a desired item by using the numerical keys
or and keys, and then press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
70