Denso BHT-7500S User Manual page 114

Run-time messages in downloading/uploading by FTP
When the BHT is uploading or downloading files by FTP, the following messages may
appear in the bottom of the LCD:
Messages
Aborted.
Connection error
Device error
Downloading
Download failed
Download finished
File broken!
File not found!
File not selected
File type mismatch!
FTP error
FTP opened
Illegal text format!
Opening device
Out of memory!
Out of range!
Parameter error!
Program file error!
Routing TCP/IP
Syntax error!
TCP/IP error
TCP socket error
Too many files!
Uploading
Upload failed
Upload finished
Displays when:
Uploading or downloading is interrupted.
The communications pathway is disconnected.
Failed to open a device.
Downloading starts.
Downloading has abnormally ended.
Downloading has finished normally.
In uploading, the specified file is broken.
In downloading, no file is found.
No file is selected.
In uploading, the attributes of the file selected in the
SELECT FILE entry box are different from those in the
DIR/FILE entry box.
During execution of an FTP command, an error has oc-
curred.
Connection is established by FTP.
The format of a received text is illegal.
Opening a device.
The memory is insufficient for storing files to be down-
loaded.
The specified parameter(s) is out of the allowable range.
In downloading, the record length and/or field length
specified in the FIELDS entry box exceed 255.
The received program file is illegal.
Connecting to the TCP/IP communications pathway.
A syntax error has occurred.
Failed to connect to the TCP/IP communications pathway.
During execution of an FTP command, an error has oc-
curred in the TCP layer.
The current download will exceed the allowable number
of files in the memory.
Uploading starts.
Uploading has abnormally ended.
Uploading has finished normally.
94