Denso BHT-7500S User Manual page 120

[8.1.1] ID entry screen
SET ID
1:CLIENT NAME
[
2:SSID
tsunami
SET ID
1:CLIENT NAME
[
2:SSID
tsunami
Set up?
1:Yes 2:No
Selecting the "1:ID" on the RF parameter menu
displays the "** Now Loading **." After that, the
screen shown at left will appear where the current
]
settings are displayed.
1 CLIENT NAME Sets a client name that is the
2 SSID
Select a desired item by using the numerical keys
or and
The screen enters the alphanumeric entry mode in
which a cursor appears.
Make the desired settings with the numerical keys
and period (.) key. To switch the entry mode be-
tween the numeric mode (without guidance) and
alphabet mode, press the SF key. After comple-
tion of settings, press the ENT key.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
For details about the client name and service set
ID, refer to Subsection 3.1.2.
Pressing the ENT or C key when any item is
highlighted will display the confirmation message
as shown at left.
]
To save the new entry, choose "1:Yes" and press
the ENT key. The "** Now Setting **" will appear
and the screen will return to the RF parameter
menu.
To cancel the new entry, choose "2:No" and press
the ENT
discarded and the screen will return to the RF
parameter menu.
When the "** Now Setting **" is displayed,
the new entry will be written onto the
EEPROM of the wireless module built in the
BHT-7500W.
While this message is displayed, do not turn
the BHT off. Writing halfway onto the
EEPROM will not bring any assured settings.
100
BHT name to be used on the
network.
Sets a service set ID to be used
on the RF communications net-
work.
keys, and then press the ENT key.
key. The newly entered data will be
BHT-7500W