Denso BHT-7500S User Manual page 87

SET ID
00001 >> _
SET ID
00001 >> 65535_
Chapter 2. Getting Started the BHT and System Mode
Selecting the "2:BHT-Ir Protocol" on the PROTO-
COL TYPE screen calls up the screen shown at left.
Enter the ID number of the BHT by using the nu-
merical keys, and then press the ENT key. If you
do not need to modify the current setting, press
the ENT key only.
An ID number should be five-digit decimal
character string. The entry range is from
00001 to 65535. If the entry value is less
than five digits, the ENT key will be deacti-
vated.
If you make a wrong entry, press the BS key ( SF
+ C keys) to delete it and then enter the correct
data.
To return to the SET COMMUNICATION menu,
press the C key.
67