Denso BHT-7500S User Manual page 139

DOWNLOAD
_SYSMSG.FN3
** Completed **
If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of
the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and ENT
keys.
To return to the SYSTEM MESSAGE transfer menu, press the C key.
DOWNLOAD
Out of memory!!
Retry?
1:Yes 2:No
DOWNLOAD
File mismatch!!
Retry?
1:Yes 2:No
Chapter 2. Getting Started the BHT and System Mode
Upon completion of downloading, the BHT dis-
plays the screen shown at left and beeps once.
Press the C key to return to the SYSTEM MES-
SAGE transfer menu.
When the BHT downloads the system mes-
sage file, it creates a temporary file named
"_SYSMSG.FN3" in the user area. If the
user area is insufficient for creating the tem-
porary file, therefore, an error will result.
The created temporary file will be automati-
cally deleted after completion of download-
ing.
Problem
The memory is insufficient for storing the system
message file to be downloaded.
Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory. (Re-
fer to Subsection 2.5.3, [ 9 ].)
Problem
You attempted to download a file other than the
system message file.
Solution
Check whether the file you attempted to download
is a system message file.
119