If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of
the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and
ENT keys.
DOWNLOAD FILE
Out of memory!!
Retry?
1:Yes
2:No
DOWNLOAD FILE
Too many files!!
Retry?
1:Yes
2:No
DOWNLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes
2:No
Chapter 2. Getting Started the BHT and System Mode
Problem
The memory is insufficient for storing files to be
downloaded.
Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory or
decrease the size of the file to be downloaded.
(Refer to Subsection 2.5.3, [ 9 ] and [ 2 ].)
Problem
The current download will exceed the maximum
of 80 files in the memory.
Solution
Press the 2 key to return to the SYSTEM MENU.
Delete unnecessary files in memory or decrease
the number of files to be downloaded if you at-
tempted to download more than one file. (Refer to
Subsection 2.5.3, [ 9 ] and [ 2 ].)
Problem
Downloading has failed.
Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Subsection
2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
49