Denso BHT-7500S User Manual page 105

[5.8] File test
TEST FILE
SAMPLE01.PD3
*SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
+SAMPLE05.PD3
SAMPLE06.PD3
SAMPLE07.PD3
SAMPLE08.PD3
SAMPLE09.PD3
SAMPLE10.PD3
SAMPLE11.PD3
SAMPLE12.PD3
SAMPLE13.PD3
SAMPLE14.PD3
SIZE:XXXXX
FREE:YYYYY
TEST FILE
SAMPLE01.PD3
00004096 bytes
OK
SIZE:XXXXX
FREE:YYYYY
TEST FILE
SAMPLE02.PD3
00004096 bytes
NG
SIZE:XXXXX
FREE:YYYYY
If a defective file is found, delete it or overwrite it with the same name file.
Even defective, the file can be uploaded on the UPLOAD menu. It is, therefore,
recommended that important files be uploaded before deleted.
Chapter 2. Getting Started the BHT and System Mode
Selecting "8:FILE" on the TEST menu calls up the
screen shown at left.
If any of the files stored in the memory is defec-
tive, an asterisk (*) or plus sign (+) will be prefixed
to the defective file name(s). For details about the
(*) and (+), refer to Subsection 2.3.7, [ 3 ].
Selecting a file on this screen will show the file
size and the test result.
To select a file, use the
the cursor to the desired file. If there are more
than 14 files, the screen will scroll.
Highlighted is the currently selected file.
Press the C key to return to the TEST menu.
The file name, file size, and test result (OK or NG)
appear as shown at left.
Press the C key to return to the file selection
screen.
85
and keys to move